Connect the signal cable to the 15-pin D-sub connector on the back of your monitor.
Connect the power cord for your monitor to the power port on the back of the monitor.
Connect the signal cable to the video port on your computer, video board, video card, or graphics card.
Connect the power cord for your monitor to the power port on the back of the monitor.
Rear
General
SyncMaster 591S/793S/793DF/795DF /797DF/997DF/793MB/795MB
(The configuration at the back of the monitor may vary from product to product.) 1. Power port
2. Signal Cable
BNC Connectors (Option)
SyncMaster 997DF
(The configuration at the back of the monitor may vary from product to product.) 1. Power port
2. Signal port
3.BNC Connectors Connect the signal cable to the BNC signal port on the back of your
(Option)monitor.
Note: See Connecting Your Monitor for further information regarding cable connections.
