Samsung 710NT manual Local Device USB compatibility

If you turn the Client monitor off while booting, it may damage the product.

Local Device (USB) compatibility

HID(Human Interface Devices)

:Keyboard, Mouse MSC(Mass Storage Class)

:Devices using the SCSI(Small Computer System Interface) command set

:FAT(File Allocation Table) System

Exception

Some manufacturers have wrongly specified their device as USB standard compatible. Our product has exception handling procedures.

But Some devices are unlikely to work properly.

Some manufacturers have wrongly specified their device as SCSI compatible. Such devices are unlikely to work properly.

It is recommended that USB devices are purchased after they are tested and confirmed to be compatible.

PowerSaver (When used as a normal monitor)

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.

State	Normal Operation	Power saving mode	Power off
			(Power button)
Power Indicator	Green	Green, Blinking	Off
Power Consumption	Less than 45 W	Less than 2 W	Less than 2 W
		(Off-mode)

PowerSaver (When used as a Client monitor)

State	Normal Operation	Power saving mode	Power off
			(Power button)
Power Indicator	Green	Green, Blinking	Off
Power Consumption	Less than 35 W	Less than 2 W	Less than 2 W
		(Off-mode)

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.