and over again.
Set the maximum size of local system memory (in kilobytes) to be used for caching a nd the
minimum size of bitmaps to be cached and the directory the files should be stored locally.
A
too high setting might leave the Thin Client with too low memory for its system a nd other
applications! In doubt, you have the possibility of adding RAM to your Thin Client.
Drive Ma
pp
in
g
"Drive Mapping" makes any directory mounted on your Thin Client available to you during ICA
sessions on Citrix servers. Use this page to specify which folders or drives to m ap at logon.
This applies for all ICA connection sessions.
Activate Drive Mapping
This option allows you to temporarily enable/disable the drive mapping. This give s you the
advantage of not losing your stored settings, but being able to switch them on/off.
How to configure a “Drive Mapping”:
Enable one of the three mappings to activate the corresponding entry fields. Then click o n the
corresponding button in the “Drive to map” column. Now select the drive letter under which
the local device or folder should be mapped. In case the drive letter you select ed is not
available on the Citrix server anymore, the specified directory or local drive will be mappe d to
the next free drive letter at logon.
In the “Local Drive Path” field, set the path name of the local directory the mapping should
point to. When mapping a locally attached device, use the pre-defined pa th names as offered
by the drop-down box. These are the directories the devices are mounted to by default at boot
up.
Finally specify the access rights for the mapping. You can choose to grant “Read Ac cess”,
“Write access” or to “Ask User” for each mapping separately.
The same drive mappings and access settings will apply to all ICA connections.
COM Ports