Samsung 711LT, 911LT

zAutomatic Logon : Select if you want to logon automatically.

{User Name: User Name to be used for connection.

{Password: Password to be used for connecting to the system.

{Domain: Domain name in which the system is present on the network .

Displa

The Display tab of the Connection Manager has the following display properties to be set w hile

connecting to the remote desktop / server

zRemote Desktop Size: - Size of the window when connection is esta blished.

zColor Depth: - Color depth to be used while connecting to the server.

Local Resources

This section has the following connection properties to be set

zRemote Computer Sound: - Determines whether the multimedia files, when played on

the connected server/desktop, should start the audio playback on the local system, the

remote system or should totally suppress any such playback.

zKeyboard: - Select Keyboard layout to emulate.

zReconnect: - Auto reconnects if session is disconnected by some unusual reason.

zCreate desktop shortcut

Pro

rams

llows setting of a program to run when connection is established success fully. The default is

desktop to be displayed on connection.

Experience

This menu section allows performance settings to be selected for better performance on

connection. In case of performance problems, disable some not necessarily needed graphi cal

features.

zNo Encryption: This option is only needed (and will only work) if you have a French

version of NT TSE.

zDo not send Motion Events: This saves bandwidth, although some Windows

applications may rely on receiving mouse motion.

zNT4 Compatible: Use RDP version 4. The default is RDP v5.

zSpeed Level: It changes default bandwidth performance behavior for RDPv5. By

default only theming is enabled, and all other options are disabled (corresponding to

modem (56 Kbps)). Setting experience to broadband enables menu animations and full

window dragging. Setting experience to LAN will also enable the desktop wall paper.

Setting experience to modem disables all (including themes).

Drive Mappin

If you have mass storage devices attached, make them available to the user by mapping them

here. Press the "Add" button, select the drive name, type and base directory (where device is

mounted on local system) to be used finally press "OK" button to map it (see picture). The

server requires Windows XP or newer. The share name is limited to 8 characters.

Device Mappin

s well as locally attached mass storage devices, you may also map the local COM ports of

the Thin Client into the RDP session.

Enable COM port mapping and add the wanted port. /dev/ttyS0 stands for COM1

and /dev/ttyS1 for COM2.

VNC

You can configure VNC Client settings for a particular session as given belo w:

General

The General tab of the VNC Settings has the following connection information to b e provided

at the time of connection:

zName: Provide Name by which you want the connection to be identified.

zServer: Provide IP address of the server whom you want to connec t to.

zAutomatic Logon: Select if you want to logon automatically.

{Password: - Password to be used for connecting to the system.

Displa

The Display tab of the VNC Connection Manager has the following displa y properties to be set

while connecting to the remote desktop / server