45
English
04 Advanced Features
¦Recording
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
✎
When there are more than two recordi ng devices
x
When multiple recording devic es are connected, the recording d evices are listed. Select one re cording device in
the Device List.
✎
When the recording device is not dis played, select Device List an d press the Red button to search devi ces.
2. Press the EXIT button to exit.
✎
You can record the source streams by selecting R ecording: (device_name).
✎
Pressing the
�
(REC) button will record whatever you are cu rrently watching. If you are watching vide o from
another device, the video from the dev ice is recorded.
✎
Before recording, check whether the a ntenna jack is properly conn ected to the recording device. To properly
connect an antenna to a recording dev ice, refer to the recording device’s users ma nual.
¦Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎
If your receiver supports audio o nly, it may not appear in the device list.
✎
The receiver will work when you have pr operly connected the optica l in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎
When the receiver (i.e Home Theater) is s et to On, you can hear sound output fro m the TV’s Optical jack. When
the TV is displaying a DTV (air) sign al, the TV will send out 5.1 channel sound to the re ceiver. When the source is a
digital component such as a DVD and i s connected to the TV via HDMI, onl y 2 channel sound will be hea rd from
the receiver.
✎
NOTE
x
You can only control Anynet+ devices using the T V remote control, not the buttons on the T V.
x
The TV remote control may not work under c ertain conditions. If thi s occurs, reselect the Anynet+ devi ce.
x
The Anynet+ functions do not operate with oth er manufacturers’ products.
Using the ARC function
You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎
To use the ARC function, a receiver which supp orts the HDMI-CEC and ARC featu res must be connected to the HDMI
IN 2 (ARC) port.
✎
To disable the ARC function, set the Receiver to O ff. Even if the TV transmits the ARC signa l continuously, the receiver
will be blocked from receiving the s ignal.
[PC8000_NA]BN68-02586A-06L03.indb 45 2010-06-24 오전 9:41:15