Samsung 800TFT manual PowerSaver, Power-saving modes, Adjusting Your FPD

Adjusting Your FPD

PowerSaver

This FPD has a built-in power management system called PowerSaver. This system saves energy by switching your FPD into a low-power mode when it has not been used for a certain amount of time. The available modes are “On”, “Standby”, “Sleep Mode”, and “Deep Sleep Mode”

Table 2. Power-saving modes

	Normal	Power-Saving Function mode (EPA/NUTEK)
State
	Operation	Standby Mode	Sleep Mode	Deep Sleep Mode
			Position A1	Position A2
Horizontal Sync	Active	Inactive	Active	Inactive
Vertical Sync	Active	Active	Inactive	Inactive
Video	Active	Blanked	Blanked	Blanked
Power	Green	Amber	Green/Amber	Amber
Indicator			Blinking	Blinking
			(0.5 sec	(1 sec interval)
			interval)
Power	60W (Max.)	Less than 5W	Less than 5W	Less than 5W
Consumption	56W (Nom.)

NOTE: This FPD automatically returns to normal operation when horizontal and vertical sync return. This occurs when you move the computer’s mouse or press a key on the key- board.

For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

NOTE: Screen saver video patterns designed for use with CRT-based monitors are not recom- mended for use with your FPD since they may not extinguish the FPD’s back light resulting in premature aging.

15

Italiano Portuguese Deutsch Español Français English