Installation
English
1
3
4
2
5
To workstation
video port
6
Français
Figure 3. Connecting your monitor to a PC
1 | Turn off your system and unplug its power cord. |
2 | Place the FPD facedown on a cushion (being careful not to harm the screen) so that |
you can access the cable connectors along the bottom of the rear recess. | |
3 | When connecting your FPD to a computer: Connect the supplied signal cable to the |
| cable to the video port on the back of your computer. |
| When connecting your FPD to a workstation: Connect an optional signal cable to the |
| 13W3 connector ➂ on the back of your FPD. Connect the other end of the cable to the |
| video port on the back of your workstation. An adapter may be required. |
| NOTE: One or both types of signal cables can be connected to the FPD, |
| simultaneously. |
4 | Connect the power adapter jack to the power port ① on the back of the FPD. To |
prevent dislodging the jack, slide the power adapter cable into the cable holder. Insert | |
| the cable holder into the holder slot and turn it 1/4 turn. Connect the proper power |
| cord for your locale to the AC inlet on the power adapter. |
5 | Place your FPD upright on your desk and plug the power cords from your system and |
your FPD into a nearby outlet. | |
6 | Turn on your system and FPD. If your FPD displays an image, installation is complete. |
7 | Perform the auto adjustment procedure as described in “Auto Adjustment” on page 6 |
| 5 |
