Samsung 800TFT Back panel connectors, 13W3 signal cable connector, Kensington security slots

Power adapter connector Connect the power adapter jack here.

15-pin, mini D-sub signal cable connector Connect a computer system to this connector.

Your Flat Panel Monitor

1
4
5	2

3

5

6

Figure 2. Back panel connectors

1

2

3	13W3 signal cable connector
	Connect a 13W3 cable (Optional) from the video connector on your workstation to this
	connector.
4	Power adapter cable holder slot
	The plastic cable holder fits into this slot to protect the power adapter jack from being
	inadvertently dislodged. To disconnect the power adapter, turn the plastic holder 1/4
	turn to the left or right and pull the holder out of the cabinet.
5	Kensington security slots
	This FPD offers you the opportunity to attach a Kensington-type security device in two
	different locations; on the panel cabinet or on the tower stand. Please note that the
	location on the panel cabinet is more secure than the one on the tower stand.
	Kensington lock not included. Refer to your locking device documentation for
	installation instructions.
6	USB hub receptacle
	You may install a self-powered USB hub in this slot. Remove the cover to reveal the

available space.

4