3.Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
4.Select AV or
Connect to the DVD Devices input if the device has a EXT(RGB).
You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on.
1.Connect the SCART cable to the DVD SCART connector.
2.Select Ext. by using the SOURCE button.
2.Connecting TV
You may view television programs on the monitor if it is connected to an antenna or a CATV cable without installing any separate TV reception hardware or software on your computer.
1.Connect the CATV or antenna coaxial cable to the antenna terminal on the rear of the monitor. You need to use a coaxial antenna cable.
When using an interior antenna terminal:
Check the antenna terminal on the wall first and connect the antenna cable.
When using an outdoor antenna:
If you are using an outdoor antenna, use a professional for installation if possible.
To connect the RF cable to the antenna input terminal:
Keep the copper wire portion of the RF cable straight.
2.Turn on the monitor.
3.Select TV by using SOURCE button among the external signal adjustment buttons.
4.Select a desired TV channel after channel search.
Is weak signal causing poor reception?
Purchase and install a signal amplifier for better reception.
