1.Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the D-SUB port on the Macintosh computer.

2.For old model Macintoshes, you need to adjust the resolution control DIP switch on the Macintosh adapter (optional) referring to the switch configuration table shown on its rear.

3.Turn on the monitor and Macintosh.

Connecting to Other Devices

The configuration at the back of the monitor may vary from product to product.

1-1. Connecting AV Devices

The monitor has AV connection terminals to connect AV input devices like DVD, VCR or Camcorder. You may enjoy AV signals as long as the monitor is turned on.

1.Input devices such as DVD, VCR or Camcorder are connected to the Video or S-Video terminal of the monitor using the S-Video cable.

The S-Video cable is optional.

2.Connect the Audio (R) and Audio (L) terminals of a DVD, VCR or Camcorders to the monitor's R and L audio input terminals using audio cables.

Page 18
Image 18
Samsung 941MP, 741MP manual Connecting AV Devices