Selecting the Automatic Operation Mode
In the Automatic mode, the room temperature and the fan speed are controlled automatically.
1 If necessary, press 
(ON/OFF) button.
Result: ◆ The On/Off indicator on the indoor unit comes on.
◆ The air conditioner runs in the mode selected when the unit was last used.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆ Plugged in ◆ Stopped
lt will start up normally after three minutes.
2To select the AUTO mode, press the Mode button until 
is displayed
at the top of the wireless remote controller.
Result: ◆ The indoor unit beeps.
◆ The air conditioner runs in AUTO mode.
Note You can change modes at any time.
3 To adjust the temperature, press the Temperature buttons one or more times until the required temperature is displayed. Possible temperatures are between 65OF and 86OF inclusive.
Result: ◆ Each time you press Temperature buttons: - The temperature is adjusted by 1OF.
◆The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature. The quantity of air is adjusted automatically.
