Airing Your Room
If the atmosphere in your room is stale, you can air it using the FAN feature.
1If necessary, press 
(ON/OFF) button.
Result: ◆ The On/Off indicator on the wired remote controller comes on.
◆The air conditioner runs in the mode selected when the unit was last used.
2To select the FAN mode, press the Mode button until 
is displayed at the top of the wired remote controller.
Result: ◆ The air conditioner runs in FAN mode.
3Select the fan speed by pressing the Fan button one or more times until the intended value is displayed:
Low
Medium
High
4To control the direction of the air flow, refer to below.
Adjusting the Air Flow Direction
Depending on the position of the indoor unit, you can adjust the position of the air flow blades, thus increasing the efficiency of the air conditioner.
1Press the Swing button.
Result: The blades are moving between up and down.
IMPORTANT When the air conditioner is first turned on, the blades are moved.
2To stop the blades, press the Swing button again.
To set to the required position, press the Swing button again when the blades are in the required position.
ENGLISH
