Samsung AP500F Fixing to the floor, Fixing to the wall, When using the anchor bolt, Indoor Unit

INSTALLATIONI I METHOD

Indoor Unit

In order to install drain hose through wall, adjust height (max. 150mm/5.91 inch) of the indoor unit using leg holder.

❏Fixing to the floor

◆When using the leg holder of the indoor unit.

1.Lie down the unit on flat floor.

2.Insert the leg holders into screwed holes and then fasten them clockwise.

3.Turn the unit right and adjust horizontal line of it.

❈Mis-alignment of the unit can cause vibration and noise.

Leg holder of the indoor unit

❏Fixing to the wall

◆When using fixing holder of the indoor unit.

1. Fix the holder using long screw bolts on wall.

2.Fix the unit using two screw bolts or four anchor bolts. (Size of the screw hole on the holder is ø 4.5mm/0.18 inch and size of the bolt is ø 6mm/0.24 inch).

Fixing holder of

the indoor unit

Outdoor Unit

❏When using the anchor bolt

1.Fix the unit on a flat, rigid floor using the anchor bolt. (Anchor bolt : M10 x 4 points - separately purchased)

❏When using the leg holder of the outdoor unit

1.Insert the foot holder (4EA).

2.Remove the nut fastened to the leg holder, and then insert the leg holder into the hole of the outdoor unit leg.

3.Fix the unit securely with the nut.

Anchor bolt fixing dimensions
	A
	Unit:mm(inch)
A	840(33 inch)	B
B	415(16.4 inch)

Nut

Outdoor unit leg

Leg holder

Foot holder

E-28