Airing Your Room
If the atmosphere in your room is stale, you can air the room using the Fan feature.
1If necessary, press the ON/OFF( 
) button.
Result: ◆ The power indicator on the control panel comes on.
◆The indoor unit beeps twice.
◆The operation mode previously set is displayed.
◆The air conditioner starts up in the mode selected when the unit was last used.
2If the FAN indicator is not displayed, press the MODE button one or more times until it appears.
Result: ◆ The indoor unit beep each time you press MODE.
◆The FAN indicator on the control panel comes on.
◆The air conditioner starts up in Fan mode.
◆The temperature is set automatically.
To operate the unit by remote control, press the FAN button.
Note | You can change modes at any time. |
3Select the fan speed by pressing the FAN SPEED button one or more times until the required setting is displayed:
Low
Medium
High
To select the fan speed by remote control, press LOW, MID or HIGH buttons.
Note | Each time you change the fan setting, the indoor unit beeps. |
4To control the direction of the air flow, refer to page 14.
