Installation Procedures

1.Open the front panel, and remove the flare nut.

2.Bend the connection pipe to an appropriate length using the spring bender depending upon the installation place.

-Allowable pipe length : Maximum 25m

-Allowable pipe drop distance : Maximum 15m

-Make no more than ten bending points on the pipe

When the pipe length is in excess of the standard pipe length of 5m, add the refrigerant (R22) of 70g for each additional 1m.

Additional Refrigerant

Example:15m pipe length, additional refrigerant to be charged is (15m-5m)X70g/m=700g

If the pipe is lengthened, the performance of the unit is degraded, and the service life is shortened. Therefore, the pipe length should be as short as possible (less than 25m).

Indoor unit

than15m

Outdoor

Less

unit

 

 

 

Indoor unit

 

 

Outdoor

 

 

 

 

unit

 

 

 

15m

Indoor unit

Fix the pipe

 

 

 

 

 

 

thanLess6m

 

 

Lessthan

 

 

S-TRAP

 

 

 

 

 

 

Outdoor

Fix the pipe

(Every 6m)

 

 

 

 

 

 

unit

 

 

3.Install the high pressure pipe to the heat exchanger liquid pipe, and the low pressure pipe to the heat exchanger gas pipe respectively using the flare nut, taking care not to cause any leakage of refrigerant.

4.Be sure to insulate the pipe with appropriate insulation material.

5.Insert the drain hose into the drain pipe, and connect them by tying them to the cable tie to prevent any water leakage.

6.After completion of the installation, check the connecting area for any gas leakage.

7.Wind a finish tape when the wiring of the refrigerant pipe, the unit, and the drain piping are completed.

Indoor unit

Outdoor unit

checking area

checking area

 

E-24

AP50Q0C_IBIM_E 32201-2.indd 24

2010-07-14 오후 4:40:55

Page 24
Image 24
Samsung AP55Q0DNUMG manual Installation Procedures

AP55Q0DNUMG specifications

The Samsung AP55Q0DNUMG is a cutting-edge processor that represents a significant leap in performance and efficiency, particularly tailored for high-end mobile devices and applications. With Samsung’s continued emphasis on innovation, the AP55Q0DNUMG showcases a blend of advanced technologies designed to provide remarkable speed, improved graphics capabilities, and enhanced energy efficiency.

At the heart of the AP55Q0DNUMG lies an octa-core architecture that integrates both high-performance and high-efficiency cores. This heterogeneous configuration allows the processor to dynamically allocate tasks to the appropriate core depending on the workload, ensuring optimal performance while preserving battery life. Users benefit from seamless multitasking, faster app launches, and overall smoother user experiences, whether engaging in demanding gaming sessions or streaming high-definition content.

The processor is built on a state-of-the-art 5nm fabrication process, which not only contributes to its compact size but also significantly improves power efficiency. This smaller node size results in lower heat generation, permitting devices to maintain peak performance without throttling under heavy loads. Additionally, the AP55Q0DNUMG supports advanced cooling technologies that further sustain performance in even the most resource-intensive conditions.

Graphics performance is another hallmark of the Samsung AP55Q0DNUMG. The processor is paired with an integrated GPU that leverages the latest advancements in graphics architecture, enabling stunning visuals and exceptional frame rates. This is particularly advantageous for mobile gamers and content creators, as it supports high-resolution displays and graphics-intensive applications with ease.

Furthermore, the Samsung AP55Q0DNUMG is equipped with advanced AI capabilities, allowing for improved user experiences through features such as intelligent photography, voice recognition, and real-time translations. This AI integration extends to optimizing system resources, enhancing battery management, and delivering personalized experiences based on user behavior.

Connectivity is paramount in today’s mobile landscape, and the AP55Q0DNUMG does not disappoint in this regard. It supports the latest wireless standards, including Wi-Fi 6E and 5G, ensuring rapid data transfer and low-latency connectivity. This makes it an ideal choice for streaming, online gaming, and seamless cloud interactions.

In summary, the Samsung AP55Q0DNUMG is a potent processor engineered to meet the demands of modern mobile applications. With its powerful core architecture, energy-efficient design, impressive graphics capabilities, and robust AI support, it stands as a formidable foundation for the next generation of smartphones and devices. As mobile technology continues to evolve, the AP55Q0DNUMG positions itself at the forefront, promising to enhance both user experiences and overall performance across various applications.