Connection of Refrigerant Piping

When installing, make sure there is no leakage. When recovering the refrigerant, ground the compressor first before removing the connection pipe. If the refrigerant pipe is not properly connected and the compressor works with the service valve open, the pipe inhales the air and it makes the pressure inside of the refrigerant cycle abnormally high. It may cause explosion and injury.

Flare Processing

1. Cut the pipe using the pipe cutter.

90	Oblique	Roughness Burr

2. Insert the flare nut into the pipe, and then perform the flare processing.

Outer Diameter	A(mm)
9.52mm	1.8
19.05mm	2.2

Pipe Bending

1.Perform bending of the pipe using the bender which has a specified bending radius.

2.Be sure to take full care to perform bending of the pipe successfully at one time. Bending and unbending the pipe more than twice makes the bending work increasingly difficult.

3.You may use the spring inserted into the gas pipe instead of the bender to bend the pipe.

4.When you bend the pipe using the spring, hold the pipe with both hands to prevent any distortion, and secure a minimum bending radius of more than 100mm.

Spring

Tightening of Connection Parts

Align the center of the connection piping, and tighten the flare nut by turning it with hand. Then tighten it again using the torque wrench in the direction as shown in the figure.

Outer Diameter	Torque (kgf•cm)	Remarks
9.52mm	250~280	-
19.05mm	990~1210	-

E-25

AP50Q0C_IBIM_E 32201-2.indd 25

2010-07-14 오후 4:40:56

AP55Q0DNUMG specifications

The Samsung AP55Q0DNUMG is a cutting-edge processor that represents a significant leap in performance and efficiency, particularly tailored for high-end mobile devices and applications. With Samsung’s continued emphasis on innovation, the AP55Q0DNUMG showcases a blend of advanced technologies designed to provide remarkable speed, improved graphics capabilities, and enhanced energy efficiency.

At the heart of the AP55Q0DNUMG lies an octa-core architecture that integrates both high-performance and high-efficiency cores. This heterogeneous configuration allows the processor to dynamically allocate tasks to the appropriate core depending on the workload, ensuring optimal performance while preserving battery life. Users benefit from seamless multitasking, faster app launches, and overall smoother user experiences, whether engaging in demanding gaming sessions or streaming high-definition content.

The processor is built on a state-of-the-art 5nm fabrication process, which not only contributes to its compact size but also significantly improves power efficiency. This smaller node size results in lower heat generation, permitting devices to maintain peak performance without throttling under heavy loads. Additionally, the AP55Q0DNUMG supports advanced cooling technologies that further sustain performance in even the most resource-intensive conditions.

Graphics performance is another hallmark of the Samsung AP55Q0DNUMG. The processor is paired with an integrated GPU that leverages the latest advancements in graphics architecture, enabling stunning visuals and exceptional frame rates. This is particularly advantageous for mobile gamers and content creators, as it supports high-resolution displays and graphics-intensive applications with ease.

Furthermore, the Samsung AP55Q0DNUMG is equipped with advanced AI capabilities, allowing for improved user experiences through features such as intelligent photography, voice recognition, and real-time translations. This AI integration extends to optimizing system resources, enhancing battery management, and delivering personalized experiences based on user behavior.

Connectivity is paramount in today’s mobile landscape, and the AP55Q0DNUMG does not disappoint in this regard. It supports the latest wireless standards, including Wi-Fi 6E and 5G, ensuring rapid data transfer and low-latency connectivity. This makes it an ideal choice for streaming, online gaming, and seamless cloud interactions.

In summary, the Samsung AP55Q0DNUMG is a potent processor engineered to meet the demands of modern mobile applications. With its powerful core architecture, energy-efficient design, impressive graphics capabilities, and robust AI support, it stands as a formidable foundation for the next generation of smartphones and devices. As mobile technology continues to evolve, the AP55Q0DNUMG positions itself at the forefront, promising to enhance both user experiences and overall performance across various applications.

Samsung AP55Q0DNUMG manual Connection of Refrigerant Piping, Flare Processing, Pipe Bending

Models: AP55Q0DNUMG