Drilling a Hole in the Wall

Drill a hole of 70mm in diameter to the outside.

The drilling should be done at a distance of less than 150mm from the floor facing the indoor unit.

ø70mm

Less than

150mm

Drain Hose

Extend the drain hose to the drain hose connected to the drain pan, and fix it with the tape or a cable-tie to prevent separation. Then make a covering of it so that water cannot flow outwardly.

Piping Material

Vinyl Chloride

(Outer diameter ø16mm)

 

 

 

Insulator

Foamed Polyethylene

 

 

Drain pan

Insulation

Band

Drain hose Indoor and outdoor unit connection

1.As the draining is of natural drain type, make the drain hose direct downward.

2.If there is any foreign substance in the drain plate, it may clog the drain pipe. Therefore, be sure to remove the foreign substance inside after installation.

3.After completion of installation, be sure to pour water into the drain pan, and then check the draining condition.(There is no problem in draining when the draining is completed within 20 seconds.)

Connecting the Pipe

The piping of this unit can be connected to the right, left, and rear side.

When you hit the area for piping connection slightly with a hammer, a hole is made.

After connecting the piping and drain hose, insert the rubber cap as shown in the figure.

Holes for piping connection (2 points)

Cover hole

E-26The shape of hole may vary with the models.

AP50Q0C_IBIM_E 32201-2.indd 26

2010-07-14 오후 4:40:56

Page 25 Page 27
Page 26
Image 26
Samsung AP55Q0DNUMG manual Drilling a Hole in the Wall, Drain Hose, Connecting the Pipe
Page 25 Page 27

AP55Q0DNUMG specifications

The Samsung AP55Q0DNUMG is a cutting-edge processor that represents a significant leap in performance and efficiency, particularly tailored for high-end mobile devices and applications. With Samsung’s continued emphasis on innovation, the AP55Q0DNUMG showcases a blend of advanced technologies designed to provide remarkable speed, improved graphics capabilities, and enhanced energy efficiency.

At the heart of the AP55Q0DNUMG lies an octa-core architecture that integrates both high-performance and high-efficiency cores. This heterogeneous configuration allows the processor to dynamically allocate tasks to the appropriate core depending on the workload, ensuring optimal performance while preserving battery life. Users benefit from seamless multitasking, faster app launches, and overall smoother user experiences, whether engaging in demanding gaming sessions or streaming high-definition content.

The processor is built on a state-of-the-art 5nm fabrication process, which not only contributes to its compact size but also significantly improves power efficiency. This smaller node size results in lower heat generation, permitting devices to maintain peak performance without throttling under heavy loads. Additionally, the AP55Q0DNUMG supports advanced cooling technologies that further sustain performance in even the most resource-intensive conditions.

Graphics performance is another hallmark of the Samsung AP55Q0DNUMG. The processor is paired with an integrated GPU that leverages the latest advancements in graphics architecture, enabling stunning visuals and exceptional frame rates. This is particularly advantageous for mobile gamers and content creators, as it supports high-resolution displays and graphics-intensive applications with ease.

Furthermore, the Samsung AP55Q0DNUMG is equipped with advanced AI capabilities, allowing for improved user experiences through features such as intelligent photography, voice recognition, and real-time translations. This AI integration extends to optimizing system resources, enhancing battery management, and delivering personalized experiences based on user behavior.

Connectivity is paramount in today’s mobile landscape, and the AP55Q0DNUMG does not disappoint in this regard. It supports the latest wireless standards, including Wi-Fi 6E and 5G, ensuring rapid data transfer and low-latency connectivity. This makes it an ideal choice for streaming, online gaming, and seamless cloud interactions.

In summary, the Samsung AP55Q0DNUMG is a potent processor engineered to meet the demands of modern mobile applications. With its powerful core architecture, energy-efficient design, impressive graphics capabilities, and robust AI support, it stands as a formidable foundation for the next generation of smartphones and devices. As mobile technology continues to evolve, the AP55Q0DNUMG positions itself at the forefront, promising to enhance both user experiences and overall performance across various applications.
Top Page Image Contents