Removing Excess Humidity

If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.

1 If necessary, press the (On/Off) button.

Result:The power indicator on the control panel comes on.

The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Switched on

Stopped

lt will start up normally after three minutes.

2 If the is not displayed on the control panel, press the button on the remote control one or more times until it appears.

Result:The indoor unit beeps each time you press the button.

The air conditioner runs in the Dry mode.

Note You can change modes at any time.

3To adjust the temperature, press the buttons one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive.

Result:Each time you press the buttons: - The temperature is adjusted by 1OC.

- The indoor unit beeps.

The air conditioner starts removing the excess humidity;

the quantity of air is adjusted automatically.

4 The fan speed is selected automatically(

: Automatic).

5To control the direction of the air flow, refer to page 16.

E-14

Page 14
Image 14
Samsung AP55Q1BNUMG, AP50Q1CNHAC manual Removing Excess Humidity