Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message | Cause/solution |
Busy | L The called handset*1 or base unit*2 is in use. |
| L Other units are in use and the system is busy. Try |
or | again later.*1 |
System is busy. | L The handset you are using is too far from the base |
unit. Move closer and try again. | |
Please try again | L The handset’s registration may have been cancelled. |
later. | |
Check tel line | L The supplied telephone line cord has not been |
| connected yet or not connected properly. Check the |
| connections (page 12). |
Don’t use this | L A wrong type of batteries such as Alkaline or |
battery. | Manganese was inserted. Use only the rechargeable |
| |
Error!! | L The handset’s registration has failed. Move the |
| handset and base unit away from all electrical |
| appliances and try again. |
Insert battery | L The handset was placed on the base unit or charger |
| without batteries. Insert the batteries properly (page |
| 13). |
Invalid | L There is no handset registered to the base unit |
| matching the handset number you entered.*1 |
| L The handset is not registered to the base unit. Register |
| the handset (page 46). |
No link to base. | L The handset has lost communication with the base |
Reconnect AC | unit. Move closer to the base unit and try again. |
adaptor. | L Unplug the base unit’s AC adaptor to reset the unit. |
| Reconnect the adaptor and try again. |
| L The handset’s registration may have been cancelled. |
| |
Phonebook full | L The phonebook memory is full. Erase unnecessary |
| entries (page 20). |
Store VM access# | L You have not stored the voice mail access number. |
| Store the number (page 36). |
*1
41