Preparation
the base unit or charger without any ill effect on the batteries.
L The battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the base unit or charger and let it charge for at least 7 hours.
Symbols used in these operating instructions
Symbol | Meaning |
{ } | The words in the |
| brackets indicate |
| button names/soft key |
| names on the handset |
| and base unit. |
| Example: |
| Unit keys: {C}, {OFF} |
| Soft keys: {View CID}, |
| {Phonebook} |
i | Proceed to the next |
| operation. |
“ ” | The words in |
| quotations indicate the |
| menu on the display. |
| Example: “Alarm” |
{V}/{^}: | Press {V} or {^} to |
“ ” | select the words in |
| quotations. |
| Example: |
| {V}/{^}: “Off” |
Setting up the unit before use
Date and time
1{MENU} i{#}{1}{0}{1}
2Enter the current date, month, and year by selecting 2 digits for each. Example: 15 July, 2008
{1}{5} {0}{7} {0}{8}
3Enter the current hour and minute
Example: 9:30
{0}{9} {3}{0}
4{AM/PM}: Select “AM” or “PM”.
5{Save} i{OFF}
Note:
LTo correct a digit, press {^}, {V}, {<}, or {>} to move the cursor to the digit, then make the correction.
L The date and time may be incorrect after a power failure. In this case, set the date and time again.
Headset (optional)
Connecting a headset to the handset allows for
Note:
L Only telecommunications compliance labelled headset should be plugged into the headset socket on the handset.
Switching a call between the headset and handset speakerphone
To switch to the handset speakerphone, press {s}.
To return to the headset, press {C}.
15