Making/Answering Calls
Making calls
1Lift the handset and dial the phone number.
L To correct a digit, press {Clear}.
2Press {C} or {Call}.
3When you finish talking, press
{OFF} or place the handset on the base unit or charger.
Using the speakerphone
1Dial the phone number, and press
{s}.
L Speak alternately with the other party.
2When you finish talking, press
{OFF}.
Note:
L For best performance, use the speakerphone in a quiet environment.
L To switch back to the receiver, press {C}.
Adjusting the receiver or speaker volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialled are stored in the redial list (each 48 digits max.).
1{REDIAL}
2{V}/{^}: Select the desired phone number.
3{C}
Erasing a number in the redial list
1{REDIAL}
2{V}/{^}: Select the desired phone number.
3{Erase} i{Yes} i{OFF}
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 20).
Example: If you need to dial the line access number “9” when making outside calls with a PBX:
1{9} i{PAUSE}
2Dial the phone number. i{C}
Note:
L A 3.5 second pause is inserted each time {PAUSE} is pressed. Repeat as needed to create longer pauses.
Answering calls
When a call is being received, the ringer indicator flashes rapidly.
1Lift the handset and press {C} or {s} when the unit rings.
L You can also answer the call by pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key answer feature)
2When you finish talking, press
{OFF} or place the handset on the base unit or charger.
Auto talk
You can answer calls simply by lifting the handset off the base unit or charger. You do not need to press {C}. To turn this feature on, see page 23.
16
