Caller ID Service
phonebook, the assigned ringer rings after the caller information is displayed. If you select “No Ringer ID” (default), the handset uses the ringer tone you selected on page 23 when a call is received from that caller.
L The ringer may be changed after the 2nd ring.
1Find the desired item (page 19). i
{Option}
2{V}/{^}: “Ringer ID” i{Select}
3{V}/{^}: Select the desired setting.
4{Save} i{OFF}
Note:
L When you assign the ringer ID to an entry in the phonebook using one handset, it is applied for all handsets.
Caller list
Important:
L Only 1 person can access the caller list at a time.
Viewing the caller list and calling back
1{View CID}
2Press {V} to search from the most recent call, or {^} to search from the oldest call.
3To call back, press {C}. To exit, press {OFF}.
Note:
L If you do not want to dial the area codes when making calls from the caller list, you can store the area
codes which you want the unit to delete automatically (page 28).
LIf the item has already been viewed or answered:
–“Q” is displayed.
–“Q” is displayed, even if the item was viewed or answered using all handsets.
LIf an arrow “→” is displayed after the number, the whole phone number is not shown. Press {>} to see the remaining numbers. To return to the previous display, press {<}.
Storing your area code
We recommend storing your area code before using Caller ID (page 27). Calls from the same area will be recorded in the caller list without the area code. You do not have to remove it before calling back the caller or storing in the phonebook.
1{MENU} i{#}{2}{5}{5}
2Enter your area code (8 digits max.). L To correct a digit, press {<} or
{>} to move the cursor, then press {Clear}. Enter the correct number.
3{Save} i{OFF}
To erase your area code
1{MENU} i{#}{2}{5}{5}
2Press and hold {Clear} until all digits erased. i{Save} i
{OFF}
28
