PREPARING THE INSTALLATION
Air Conditioner and Accessories
The following accessories are supplied with the air conditioner.
The quantities are indicated in parentheses.
Accessories in the Indoor Unit Case
Installation Plate (1)
Remote Control (1)
Batteries for
Remote Control (2)
User's Manual and Installation Manual(1)
MAONWUNAELRD'SEININSSLTT'RURUSUCOCTCIOIONNSES
MMAIASTRUNNUUEALZLDIOD'UNETIIILNPERISSETAISRTUUIONÇNGÕES
GEBRAUCHSANW
Accessories in the Outdoor Unit Case
The follow ing connection accessories may be supplied, depending on the option. If they are not supplied, it is recommended that you collect them together before starting to install the air conditioner.
Assembly Cable (1) |
(**07**) |
Assembly Cable (1) |
(**09**) |
PE T3 Foam Tube
Insulation (1)
Assembly Piping
Ø6.35mm (1)
Vinyl Tape,
Width 50mm (2)
Assembly Piping
Ø9.52mm (1)
M4 x 16 Tapped
Screws (6)
Rubber Leg (4)
Drain Hose,
length 2m (1)
Putty 100g (1)
Drain Plug (1)
The flare nuts are attached to the end of each evaporator in/ out pipe or service valve. Use the nuts w hen connecting the pipe.
The
The drain plug and rubber leg are only included when the air conditioner is supplied w ithout the assembly piping illustrated below.
