Solving Common Problems
Before contacting the
Problem | Explanation/Solution |
The air conditioner does not operate at all
Check that the breaker used for the air conditioner is switched on.
Check that the operation indicator on the indoor unit is on;
if necessary press the button on the remote control.
Check whether the Timer indicator on the indoor unit is switched on. If so:
-Wait until the
-Cancel the timer (see pages 16 and 17 for further details)
The air conditioner does not Check that there are no obstacles between you and the indoor unit. operate with the remote control Check the remote control batteries.
Check that you are close enough to the indoor unit (seven meters/yards or less).
No beep is heard when you press Check that you are pointing the remote control at the remote control
the |
| on the remote | sensor in the right of the indoor unit. |
| Replace the remote control batteries if necessary. | ||
control |
| ||
|
| ||
The air conditioner does not cool Check that the correct operating mode has been selected (Auto, Cool).
The room temperature may be too low.
Dust may be blocking the air filter guard; refer to pages 23 for cleaning instructions.
Check that there is no obstacle in front of the outdoor unit.
The fan speed does not change | Check that the operating mode is set to the Auto, Cool or Fan | ||||||
when you press the |
| button | mode ; in the Dry mode, the fan speed changes automatically. | ||||
|
|
|
|
|
| ||
The air ow direction does not | Check that the air conditioner has been switched on; if necessary, | ||||||
change when you press the | press the |
| button on the remote control. | ||||
|
|
|
|
|
| ||
button
The timer is not correctly triggered Check that the timer has been programmed correctly; see pages 16 and 17.
Odour is permeated in the room Air the room. during air conditioning
"
