Selecting the Automatic Operating Mode

You can start the air conditioner in Auto mode from your remote control. In the Auto mode, the cooling operation is selected automatically. You can also raise or lower the temperature but not the fan speed.

1If necessary, press the button.

Result:  The operation indicator on the indoor unit lights up.

The air conditioner starts up in the mode selected when the unit was last used.

The indoor unit beeps.

IMPORTANT The air conditioner is fitted with protection mechanism to prevent the unit from being damaged when it is started

immediately after being:

Plugged in

Stopped

lt will start up normally after three minutes.

2If the is not displayed at the top of the remote control,

press the button on the remote control one or more times until it appears.

Result:  The indoor unit beeps each time you press the button.

The air conditioner runs in the Auto mode.

Note You can change modes at any time.

3To adjust the temperature, press the button one or more times until the required temperature is displayed.

Possible temperatures are between 16°C and 30°C inclusive.

Result:

 Each time you press the

 

button:

 

-The temperature is adjusted by 1°C

-The indoor unit beeps

E-9

Page 9
Image 9
Samsung AQ07XLNSER, AQ07XLXSER, AQ09XLNSER, AQ09XLXSER manual Selecting the Automatic Operating Mode