Sub PCB installation(optional)
Only for multi system
(Wried remote controller, central remote controller etc.)
1. Turn the power off and take off the front panel of the indoor unit.
ENGLISH |
2.Take off the Cover PCB.
3.Attach the Sub PCB to the right side of the
4.Find the PCB wire, and connect the wire to the Sub PCB as seen in the picture.
5.Connect the wire(remote controller, central remote controller etc) to the Sub PCB.
CoverPCB |
Sub PCB |
6. Assemble the Cover PCB and the front panel.
• The Sub PCB is attached to be controlled by the wired remote controller and central controller.
45
