Samsung AR18FSSYAWTNEU Connecting network, Select the wireless router that you are using now

Connecting network

4

5 6

4.Select the wireless router that you are using now.

-When using free wireless router, refer to the corresponding user manual for password.

5.After entering the password of selected wireless router, press the [OK] tab.

-When the password has not been set, press the [OK] tab without entering the password.

6.When 'Transfer complete' pop up comes on, press the [OK] tab.

-When the air conditioner is connected with wireless router correctly, the Wi-Fi ( ) light on the Wi-Fi module will be on.

-After connecting the wireless router with the air conditioner and the Wi-Fi ( ) light blinks, check the internet connection status.

7.After 2minutes, if the Wi-Fi LED of the air conditioner is still on, it means the configuration has succeeded. At this point, you can use smart phone to control the system.

NOTE

CAUTION

•When searching a network by pressing the [Wi-Fi] button, message will be displayed on the front display a maximum of 5 minute.

•Smart A/C application is optimized with Samsung smart phones. Supported models are; Galaxy S, Galaxy S2, Galaxy Note, Galaxy S2 HD LTE, Galaxy Tab 7.0 and Galaxy tab 10.1 and other models can be added in the future. When the Smart A/C application is used with other smart phones, some functions may not work.

8

Junfrau WiFi APP_IB_DB68-03588A_EN.indd 8

2012-11-21 11:28:29