Final check and trial operation

To complete the installation, perform the following checks and tests to ensure that the air conditioner operates correctly.

Check the followings:

Strength of the installation site

Tightness of pipe connection to detect gas leak

Electric wiring connection

Heat-resistant insulation of the pipe

Drainage

Grounding conductor connection

Correct operation (follow the steps below)

1. Press the Power button and check the following:

The indicator on the indoor unit lights up.

The airflow blade opens and the fan gears up for operation.

2. Press the Mode button to select Cool or Heat (ARJQ) mode.

In Cool mode, use Temp hr. + or button and set the temperature at 16 °C.

In Heat mode, use Temp hr. + or button and set the temperature at 30 °C (ARJQ).

• Approximately 3~5 minutes later, outdoor unit will start to operate and the

Cool or Warm (ARJQ) air will blow out.

• After 12 minutes of stationary condition check the indoor unit air treatment.

Cooling mode (indoor unit check) Inlet air temp. - Outlet air temp: From 10 °C to 12 °C (indicative delta T)

Heating mode (indoor unit check) Outlet air temp. - Inlet air temp: From 11 °C to 14 °C (indicative delta T) (ARJQ)

In heating mode, the indoor fan motor can remain off to avoid cold air blown into conditioned space. (ARJQ)

3. Press the Air swing button and check the following:

The airflow blades work properly.

4.Press the Power button to stop the operation.

• When you complete the installation successfully, hand over this manual to the user for storage in a handy and safe

place.

Pump down procedure (when removing the product)

1.Turn on the air conditioner and select Fast Cool mode. Please let the compressor run for more than 5 minutes. If the compressor does not operate for more than 5 minutes due to protection control, wait about 2 minutes, and then carry out the next procedure.

2 . Release the valve caps on High and Low pressure side.

3 . Use L wrench to close the valve on the high pressure side.

4 . After approximately 2 minutes, close the valve on the low pressure side.

5 . Stop operation of the air conditioner by pressing the Power button on the indoor unit or remote controller.

6 . Disconnect the pipes.

English-55

07stIn llan atio

MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-05188A-00_UX.indd 55

2/17/2015 2:14:28 PM

Page 55
Image 55
Samsung AR24JRFSBWKNMG, AR24JRFNBWKNMG manual Final check and trial operation, English-55

AR24JRFNBWKNMG, AR24JRFSBWKNMG specifications

Samsung is renowned for its innovation and quality in the electronics industry, and the AR24JRFSBWKNMG and AR24JRFNBWKNMG air conditioners exemplify this commitment. Designed for efficiency and comfort, these models are ideal for residential and commercial spaces, providing optimal climate control.

One of the standout features of both models is the inverter technology. This technology allows the air conditioners to adjust their cooling output based on the temperature of the room, ensuring energy efficiency and consistent comfort. By running the compressor at varying speeds, these units minimize energy consumption while maintaining the desired indoor environment.

The AR24JRFSBWKNMG and AR24JRFNBWKNMG also incorporate a robust air filtration system. Equipped with a multi-stage filter, these units effectively capture dust, allergens, and other airborne particles, improving indoor air quality. This is particularly beneficial for allergy sufferers or those living in urban areas with high levels of pollution.

Noise levels are another critical consideration for any air conditioning system. Both models operate quietly, thanks to their advanced design and technology. The noise reduction features ensure that the air conditioners can function without disrupting your peace, making them suitable for bedrooms, living rooms, and office spaces.

Additionally, Samsung has prioritized user convenience with smart features. The air conditioners can be controlled remotely via a smartphone app, allowing users to adjust settings from anywhere. This smart capability ensures that your space is at the perfect temperature upon arrival, maximizing comfort and ease.

Energy efficiency is further complemented by the inclusion of a high-efficiency compressor, which contributes to lower electricity bills. The models have received a high Energy Efficiency Ratio (EER) rating, making them not only eco-friendly but also cost-effective.

Moreover, both air conditioners come with a sleek and modern design, seamlessly blending into a variety of interior styles. The compact size is ideal for space-saving installations, enhancing the aesthetic appeal of any room.

In summary, the Samsung AR24JRFSBWKNMG and AR24JRFNBWKNMG air conditioners provide a combination of advanced technology, energy efficiency, and aesthetic design. With features such as inverter technology, smart controls, and exceptional air filtration, these units cater to the needs of modern consumers seeking comfort and reliability in their climate control solutions.