Using the Auto Clean function
Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.
When the air conditioner is operating;
1. | Press the Settings button.. |
|
| |||
2. | Press the | , | or Settings button until (Clean) indicator starts to blink.. | |||
3. | Press the SET button to set the Auto clean function.. |
|
| |||
| ||||||
| controller display will disappear and Timer indicator ( | ) will turn on the indoor | ||||
| unit display.. Auto clean function will be activated after the air conditioner stops | |||||
| operating.. |
|
|
| ||
| ||||||
| operation mode used. |
|
| |||
| Auto(cool), Cool, Dry mode : 30 minutes. |
|
| |||
| Auto(heat), Heat, Fan mode :15 minutes. |
|
| |||
Cancel | ffPress the Settings button Press the | , | or Settings button to | |||
|
|
| make the (Clean) indicator blink and press the SET button.. | |||
Indoor unit display |
| • When the operation mode is set during Auto clean function is activated, | ||||
|
|
| the air conditioner will operate in chosen operation mode and the Auto | |||
|
|
| clean function will be |
•During the auto clean function, indoor fan will continue to run and air flow blade will remain open to expel ambient air.
•lighting in Auto clean mode.
SETTI 05NG
Setting the Beep sound
Beep sound from the indoor unit can be muted.
1. Press the Settings button..
2. Press the,or Settings button until (Beep) indicator starts to blink..
3.Press the SET button to mute the beep sound..
|
| 2/17/2015 2:13:52 PM | |
|
| ||
|
|
|
|