Selecting the Energy Saving Function
You can select the Energy Saving Function to save energy when cooling. The temperature range decreases in order to perform this function.
1If necessary, press the 
(On/Off) button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode you selected last.
◆The indoor unit beeps.
2 Press the 
button.
Result: ◆ The indoor unit beeps.
◆The air conditioner runs in the Energy saving function.
◆The outer airflow blade moves up and down.
◆ To stop the Energy saving function, press the 
again.
Note You can select the Energy saving function only in the Cool mode.
3Press the 
button to adjust the temperature until the required
temperature is displayed. You can set the temperature between 26°C and 30°C.
Note If you want to adjust temperature under 26°C, cancel the
Energy saving function before adjusting the temperature.
4 Press the 
button to select the fan speed until the required setting is displayed.
Note The fan speed indicator increases and decreases continuously and turns round each time you press
the 
button.
5 To control the airflow direction, refer to pages 18 and 19.
