Selecting the Automatic Operating Mode

You can start the air conditioner in Auto mode from your remote control.

1 If necessary, press the button.

Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in Cool mode with

Turbo fan speed. The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started

immediately after being: Plugged in Stopped

lt will start up normally after three minutes.

2If the press the appears.

Result:

is not displayed at the top of the remote control,

button on the remote control one or more times until it

The indoor unit beeps each time you press the button. The air conditioner runs in the Auto mode.

The Auto mode cools the room in optimum condition by adjusting the indoor temperature depending on the set temperature.

Note You can change modes at any time.

3To adjust the temperature, press the button one or more times until the required temperature is displayed.

Possible temperatures are between 16°C and 30°C inclusive.

Result:

Each time you press the

button:

-The temperature is adjusted by 1°C

-The indoor unit beeps

E-8