Cooling Your Room
You must select the Cool mode if you wish to adjust the:
◆Cooling temperature
M |
|
| FF |
OD |
| TURBO | |
E | O | ||
O | DE | TURBO | F |
| OF | ||
M |
|
| F |
O | DE | TURBO | |
| OF |
◆Fan speed when cooling
1If necessary, press the 
(On/Off) button.
Result: ◆ The OPERATION indicator on the indoor unit comes on.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
It will start up normally after a
2If the 
indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press | MO | DE . |
◆The air conditioner starts up in Cool mode. Note You can change modes at any time.
3 To adjust the temperature, press the 
or 
buttons one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: ◆ Each time you press | or | : |
-The temperature is adjusted by 1°C
-The indoor unit beeps
◆The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate.
4 Select the fan speed by pressing the | button one or more times | |
until the required setting is displayed: |
| |
Low |
|
|
Medium |
|
|
High |
|
|
Automatic |
|
|
Result: Each time you press | , the indoor unit beeps. | |
|
|
|
5To control the direction of the air flow, refer to page 15.
