Connecting External Component
Connectingthe FM and AM Antennas
Connecting Audio Component/ 5.1 Channel
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
CD Player
DIGITAL | AUDIO |
OUT | OUT |
| R L |
If AM reception is poor, connect an outdoor AM antenna(not supplied).
FM Antenna (supplied)
AM Loop Antenna (supplied)
CONNECTIONS
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
| CENTER |
R | R |
L | L |
FM antenna connection
1.Connect the FM antenna supplied to the FM
75ΩCOAXIAL terminal as a temporary
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
AM antenna connection
1.Connect the AM loop antenna supplied to the AM and terminals.
2.If reception is poor, connect an outdoor single vinyl- covered wire to the AM
FRONT SUB SURR.
WOOFER
DVD or 5.1 Channel Player
COOLING FAN | The cooling fan dissipates the heat generated inside the unit so that the unit can |
| be operated normally. The cooling fan is activated automatically to supply cool air |
| to the unit. |
| Please observe the following cautions for your safety. |
| • Make sure the unit is |
| unit could rise and may damage it. |
| • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are |
| covered with a newspaper or cloth, heat may build up inside the unit and fire may result.) |
13 | 14 |