Solving Common Problems, Technical Specifications

Solving Common Problems

Before contacting an authorized service center, perform the following simple checks.

They may save you the time and expense of an unnecessary call.

Explanation / Solution

The air conditioner does

◆Check that the circuit breaker used for the air conditioner has not been triggered.

◆Check that the power cable is plugged into a wall socket and the socket is switched on, if necessary.

◆Check that the temperature indicator on the unit is lit; if necessary,

press (On/Off) on the remote control or unit.

The air conditioner does not operate with the remote control

◆Check that there are no obstacles between you and the unit.

◆Replace the remote control batteries if necessary.

◆Check that you are close enough to the unit (seven metres/yards or less).

No beep is heard when you press (On/Off) on the remote control

◆Check that you are pointing the remote control at the remote control sensor on the unit.

◆Replace the remote control batteries if necessary.

The air conditioner does not cool

◆Check that the correct operating mode has been selected(COOL).

◆The room temperature may be too low.

◆Dust may be blocking the air filter; refer to page 14 for cleaning instructions.

◆Check that there is no obstacle blocking the air flow into or out of the unit.

The air flow direction does	◆ Check that the air conditioner has been switched on; if necessary,
not change when you press	press	(On/Off) on the remote control or unit.


the Swing button	◆ The blades may not move when the air conditioner runs in the energy saving mode.

The timer is not correctly	◆ Check that the timer has been programmed correctly; refer to page 11.
triggered

Odors are permeating the	◆ Ventilate the room.
room during air conditioning

Design and specifications are subject to change without notice.

E-15