Samsung AW0690, AW1290, AW1090, AW0890 manual Cooling Your Room, Control Panel

Models: AW0890 AW1090 AW1290 AW0690

1 16
Download 16 pages 28.57 Kb
Page 8
Image 8
Cooling Your Room

Cooling Your Room

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You must select the Cool mode if you wish to lower the temperature

Remote Control

 

 

 

Control Panel

in your room. You can also set the fan speed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Press the

 

(On/Off) button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Result:The air conditioner starts up in the mode selected when the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

unit was last used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The unit beeps twice.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The air conditioner is fitted with a protection mechanism to prevent

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the unit from being damaged when it is started immediately after

 

 

 

 

 

 

 

 

 

 

 

 

 

 

being:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Plugged in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stopped

 

 

 

 

 

 

 

 

 

 

 

 

 

 

It will start up normally after three minutes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 If the COOL indicator is not lit on the unit:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the COOL button on the remote control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the Mode button on the unit one or more times until the COOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicator lights up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Result: The unit beeps each time you press the COOL/Mode button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The air conditioner starts up in the Cool mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can change modes at any time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 To adjust the temperature, press the Temperature buttons on the remote

 

 

 

 

 

 

 

 

 

 

 

 

 

 

control or unit one or more times until the desired temperature is displayed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The temperature can be set between 18°C and 30°C.

Result: Each time you press the temperature buttons:

– The temperature is adjusted by 1°C and displayed on the control panel

– The unit beeps

The air conditioner starts cooling if the room temperature is higher than the selected temperature.

4To set the fan speed:

Press the HIGH, MED or LOW button on the remote control as desired. or

Press the Fan Speed button on the unit one or more times until the desired Fan speed indicator lights up.

5To control the direction of the air flow, refer to page 10.

E-8

Page 8
Image 8
Samsung AW0690, AW1290, AW1090, AW0890 manual Cooling Your Room, Control Panel