Removing Excess Humidity
If the atmosphere in your room is very humid or damp,you can remove excess humidity without lowering the room temperature too much.
1If necessary, press the (On/Off) button.
Result: | The air conditioner starts up in the Cool mode. |
| The unit beeps twice. |
The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Plugged in
Stopped
It will start up normally after three minutes.
2If the temperature is not displayed on the control panel:
press the button the unit one or more times until the temperature is displayed.
Result: The unit beeps each time you press the button.
The air conditioner starts up in the cool mode.
You can change modes at any time.
3To adjust the temperature, press the orbuttons one or more times until the required temperature is displayed.
Possible temperatures are between 64 F and 86 F inclusive.
Result: | Each time you press the | or | buttons: |
-The temperature is adjusted by 1 F
-The unit beeps
The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.
4To control the direction of the air flow, refer to page 24.
Control Panel
Power