Cisco Systems 7200 VXR manual 1-61, Typical Power Supply-Monitored DC-Voltage Thresholds

Chapter 1 Cisco 7200 VXR Product Overview

Functional Overview

Table 1-37	Typical Power Supply-Monitored DC-Voltage Thresholds
Parameter		Low Critical	Low Warning	High Warning	High Critical
+3.45V		+3.26V	+3.34V	+3.55V	+3.63V
+5.15V		+4.86V	+4.99V	+5.31V	+5.43V
+12.15V		+11.39V	+11.67	+12.62V	+12.91V
–11.95V		–9.52V	–10.73	–13.16V	–14.38V

Note A low warning or high warning message does not mean that the router is at risk of malfunctioning or being damaged.

The low warning and high warning ranges in Table 1-34and Table 1-35are informational. If a low warning or high warning message appears, the warning message does not signify that an error or hazard is occurring. A high warning message sometimes appears in a lightly loaded chassis, especially if the router is running without port adapters or with dual power supplies. Adding current load to the router may remove the warning; this can be achieved easily by installing one or more port adapters.

Below are sample high warning messages from chassis with 3V and 5V power supplies:

Router(boot)# 00:00:44:%ENVM-4-ENVWARN:+3.45 V measured at +3.57

Router(boot)# 00:04:49:%ENVM-4-ENVWARN:+5.15 V measured at +5.33

Note Low critical or high critical warning messages should be addressed immediately through the normal field support procedures.

Table 1-38	Typical Power Supply-Monitored DC-Voltage Thresholds—For Cisco IOS Release
	12.0(23), Cisco IOS Release 12.3(8), and Later Releases of Each
Parameter		Low Critical	High Critical
+3.45V		+3.18V	+3.72V
+5.15V		+4.80V	+5.49V
+12.15V		+11.29V	+13.00V
–11.95V		–9.52V	–14.38V

Note The low warning and high warning messages are no longer in existence beginning with Cisco IOS Release 12.0(23) and Cisco IOS Release 12.3(8).

Cisco 7200 VXR Installation and Configuration Guide

OL-5013-09 1-61