Cisco Systems 7200 VXR manual Input/Output Controller C7200-I/O-FE LEDs, 1-45

Chapter 1 Cisco 7200 VXR Product Overview

Field-Replaceable Units

Table 1-28	C7200-I/O-2FE/E I/O Controller LEDs
LED	Color	Function
100 Mbps	Green	Indicates that the port is configured for 100-Mbps operation (speed 100),
		or if configured for autonegotiation (speed auto), the port has detected a
		valid link at 100 Mbps.
		Note If the port is configured for 10-Mbps operation, or if it is
		configured for autonegotiation and the port has detected a valid
		link at 10 Mbps, the LED remains off.
LINK	Green	Indicates that the Ethernet/Fast Ethernet RJ-45 receptacle has established
		a valid link with the network. This LED remains off during normal
		operation of the router unless there is an incoming carrier signal.

Input/Output Controller C7200-I/O-FE LEDs

Figure 1-25shows the LEDs on the I/O controller with the Fast Ethernet port that is equipped with an MII receptacle and an RJ-45 receptacle (C7200-I/O-FE), and Table 1-29lists the LEDs specific to this I/O controller model. Also see Table 1-24for LEDs common to all I/O controllers.

Cisco 7200 VXR Installation and Configuration Guide

OL-5013-09 1-45