Samsung B2240MWX user manual Set to Off when viewing directly in front of the screen

Menu Description

This feature allows you to see optimal screen quality according to your viewing position.

When viewing the screen at an angle from below, above or the side of the monitor, by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front.

Set to <Off> when viewing directly in front of the screen.

•<Off> - Select when viewing from the front position.

•<Lean Back Mode1> - Select when viewing from a slightly lower position.

•<Lean Back Mode2> - Select when viewing from the lower position.

•<Standing Mode> -Select when viewing from the upper position.

•<Side Mode> - Select when viewing from the left or right position.

•<Custom> -When <Custom> is selected, settings for <Lean Back Mode 1> is applied by default.

MagicAngle Users can set suitable picture quality as needed.

•This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> or <Cinema> mode.

•This menu is unavailable when <MagicColor> or <Color Effect> is set.

	Removes vertical noise lines (line pattern) from the screen.
Coarse	The location of the screen may be changed after the adjustment. In this case, move the screen so
	that the screen is displayed at the center of the display panel using the <H-Position> menu.
		This function is only available in Analog mode.
	Removes horizontal noise lines (line pattern) from the screen.
Fine	If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then
	use the <Fine> function again.
		This function is only available in Analog mode.
	When watching with a DVD or set-top box connecting to the product via HDMI, image quality deterio-
	ration (black level, lower-quality contrast, lighter color tone, etc.) may occur depending on the con-
	nected external device.
HDMI Black Level	•	<Normal>
	•	<Low>
		This function is active only when the external device is connected via <HDMI>. The <HDMI
		Black Level> function may not be compatible with all external devices.

Using the product 3-44