Sony NSX-A959 +, w, Press RANDOM/REPEAT, Press PRGM twice in stop mode, program a track, Example

m

●While the disc compartment is opened with DISC CHANGE, do not press buttons other than DISC CHANGE or A OPEN/ CLOSE. Doing so may cause malfunctions. In this case, reset the unit referring “TOreset” on page 24.

●When loading an 8-cm (3-inch) disc, make sure to put it onto the inner circle of the tray precisely. Otherwise, the disc may be damaged or the disc compartment will not open. If it does not open, please consult your Aiwa dealer for repair.

●Do not place more than one compact disc on one disc tray.

* Do not tilt the unit with discs loaded. Doing so may cause malfunctions.

e When transporting the unit, remove the discs from the trays.

●When replacing the discs during play, do not replace discs other than those facing you.

If you place a disc on the empty right inner tray, and then press A OPEN/CLOSE, “ERROR” is displayed and the disc compartment may not close. Remove the disc on that tray.

Never place here.

Use the remote control.

RANDOM play

All the tracks on the selected disc or on all the discs can be played randomly.

REPEAT play

A single disc or all the discs can be played repeatedly

Press RANDOM/REPEAT.

Each time it is pressed, the function can be selected cyclically. RANDOM play — RANDOM lights up on the display. REPEAT play — = lights upon the display. RANDOM/REPEAT play — RANDOM and G light up on the display

Cancel — RANDOM and - disappear from the display.

To play all discs, press 4> to start play.

To play a single disc, press DISC DIRECT PLAY, then press one of the numbered buttons 1-5within 3 seconds to start play.

m

During random play it is not possible to skip to the previously

played track with the ++.

Up to 30 tracks can be programmed from any of the inserted disc.

1

2

2,3
+, w	5
	9

Lh>ethe remote control.

1 Press PRGM twice in stop mode.

PRGM indicator lights up on the display.

PRGM

●When PRGM is pressed once in step 1, the unit enters KARAOKE PROGRAM (page 20).

2Press DISC DIRECT PLAY, then press one of the numbered buttons 1-5 within 3 seconds to select a disc.

Go to the next step when the tray stops rotating.

3 Press the numbered buttons O-9 and +10 to

program a track.

Example:

To select the 25th track, press +10, +10 and 5.

To select the 10th track, press +1O and O.

Selected	Total number of
track number	selected tracks

Program	Total pla~ing time of
number	the selected tracks

4 Repeat steps 2 and 3 to program other tracks.

5 Press 4> to start play.

T~ check the Drociram

Each time +-or - is pressed in stop mode, a disc number, track number, and program number will be displayed.

Tb clear the program

Press ■ CLEAR in stop mode.

To add tracks to the program

Repeat steps 2 and 3 in stop mode. The track will be programmed after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again.

To play the programmed tracks repeatedly

After programming the tracks, press RANDOM/REPEAT repeatedly until - appears on the display.

[m

~uring programmed play, you cannot perform random play,

checking the remaining time, and selecting a disc or track.

ENGLISH I 2