Sony NSX-A959 manual To play all discs in the disc compartment, press +b

K

Press CD, then press & OPEN/CLOSE to open the disc compartment. Load disc (s) with the label side up.

To load one or two discs, place the disc(s) on the tray(s) in the direction of the arrows as illustrated.

Tray num

To load three to five discs, press DISC CHANGE to rotate the trays after placing two discs. Place the next disc on the empty tray. Each time DISC CHANGE is pressed, the trays rotate and

one disc can be placed.

After placing the disc, press A OPEN/CLOSE to close the disc compartment.

The display shows the information of the disc to be played.

Tray number of the
disc to be played	Total playing time

Total number of tracks

Load discs.

To play all discs in the disc compartment, press +b.

All discs are played once.

Number of track being played Elapsed playing time

To play one disc only, press one of the DISC DIRECT PLAY 1-5.

The selected disc is played once.

To play with the remote control

Press DISC DIRECT PLAY, then press one of the numbered buttons 1-5within 3 seconds to select a disc.

To stop play, press ■ .

To pause play, press 11. To resume play, press again.

To search for a particular point during playback, keep U

or - pressed and release it at the desired point.

To skip to the beginning of a track during playback, press

+or - repeatedly or turn MULTI JOG. To remove discs, press A OPEN/CLOSE.

You can only remove the two discs that face you. When the disc to be removed does not face you, press DISC CHANGE repeatedly.

To start play when the power is off (Direct Play Function) Press CD. The power is turned on and play of the loaded disc(s) begins,

When A OPEN/CLOSE is pressed, the power is also turned on and the disc compartment is opened.

To check the remaining time

Press EDIT/CHECK on the remote control during play. The amount of time remaining until all tracks finish playing is displayed. To restore the playing time display, press EDIT/CHECK again.

When using the main unit, press CD EDiT/CHECK during play.

Selecting a track with the remote control

1Press DISC DIRECT PLAY, then press one of the numbered buttons 1-5within 3 seconds to select a disc.

2Press numbered buttons O-9 and +1Oto select a track. Example:

To select the 25th track, press +1 O, +1 O and 5. To select the 10th track, press +10 and O.

The selected track starts to play and play continues to the end of that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without interrumina r31av.

1Press WC-CHANGE.

Two discs can be replaced.

2Remove the discs and replace with other discs.

To replace the other two discs, press DISC CHANGE again.

3Press 4 OPEN/CLOSE to close the disc compartment.

11 ENGLISH