Sony NSX-A959 manual ENGLISH14

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily.

When E of ● ➤ button is flashing, press _ to move to the next track or 44 to move to the beginning of the current track.

When < of <P	button is flashing, press < to move to the
next track, or _	to move to the beginning of the current track.

The search function may not be able to detect tracks under the

follwing conditions:

●Blanks of less than 4 seconds between tracks

●Noisy blanks

●Long passages of low-end sound

●Low overall recording levels

After playback on one deck finishes, the tape in the other deck will start to play without interruption.

1 Insert tapes into deck 1 and deck 2.

2 Press TAPE/DECKl/2 to select the deck to be played back first.

3 Press REV MODE to select Z).

4 Press 4 b to start playback.

Playback continues until ■ is pressed.

About cassette tapes

*TO prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Side A	, <Q;;Q
	q
	, @
	e	,
	Type II tape	Tab for side A
	detection
	slot
	[>	/

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.)

“120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

‘Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.

DOLBY NR system

The Dolby Noise Reduction system reduces tape hiss noise. For optimum performance when playing back a tape recorded with the DOLBY NR system, turn on the DOLBY NR system.

ENGLISH14