Sony NSX-A959 manual m aI, d Repeat for the rest of the tracks for side A, Tape length

d Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time cannot be programmed,

Selected track number

5

4

2 m aI

8

1

3,7

Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed.

Sele~ted disc P;ogram number	Remaining time	Pr~grammed
number	of side A	tracks

7 Press CD EDIT/CHECK to select side B and program the tracks for side B.

After confirming Bon the display, repeat step 5.

Tape side B (reverse side)

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side.

1 Insert the tape into deck 2, and press DOLBY NR to turn Dolby NR on or off.

Insert the tape with the side to be recorded on first facing out from the unit.

2Press CD and load the disc(s).

3Press CD EDIT/CHECK twice.

EDIT lights up and “PRGM”flashes on the display.

When using the remote control, press EDIT/CHECK twice.

PRGM

When “Al”is displayed, press CD EDIT/CHECK again.

4 Press + or -to designate the tape length.

10 to 99 minutes can be specified.

●The numbered buttons O-9 or MULTI JOG are also available to designate the tape length.

	Maximum recording
Tape length	Tape side (A) time for side A
I	I

8 Press ● REC/REC MUTE to start recording.

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.

To stop recording

Press h. Recordin~ and CD play stop simultaneously.

To check the order of the programmed track numbers ❑ Before recording, press CD EDIT/CHECK to select side A or B,

and press < or - repeatedly or turn MULTI JOG.

Disc number Program number

Track number Programmed track numbers

To change the program of each side

Press CD EDIT/CHECK to select side A or B, and press ■ CI.EAR to clear the program of the selected side. Then program tracks again.

Tc) clear the edit program

Press ■ twice so that “EDIT disappears on the display.

5 Press DISC DIRECT PLAY, then press numbered buttons 1-5 within 3 seconds on the remote control to select a disc. Then press numbered buttons O-9 and +1 O to program a track.

Example: To select the 10th track of disc 2, press DISC

DIRECT PLAY and numbered button2, then press numbered buttons +1O and O.

Em

●Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

●l-he edit function cannot be used with discs containing 31 tracks c}r more.

ENGLISH 18