3-20 Standard Signal Mode Table
The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel, unlike for a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on. Therefore, configure it as follows referring to the User Manual of the graphics card.
E1920N/E1920NX
Display Mode | Horizontal | Vertical Frequency | Pixel Clock (MHz) | Sync Polarity (H/V) | |
Frequency (kHz) | (Hz) | ||||
|
|
| |||
|
|
|
|
| |
IBM, 640 x 350 | 31.469 | 70.086 | 25.175 | +/- | |
|
|
|
|
| |
IBM, 720 x 400 | 31.469 | 70.087 | 28.322 | ||
|
|
|
|
| |
MAC, 640 x 480 | 35.000 | 66.667 | 30.240 | ||
|
|
|
|
| |
MAC, 832 x 624 | 49.726 | 74.551 | 57.284 | ||
|
|
|
|
| |
VESA, 640 x 480 | 31.469 | 59.940 | 25.175 | ||
|
|
|
|
| |
VESA, 640 x 480 | 37.861 | 72.809 | 31.500 | ||
|
|
|
|
| |
VESA, 640 x 480 | 37.500 | 75.000 | 31.500 | ||
|
|
|
|
| |
VESA, 800 x 600 | 35.156 | 56.250 | 36.000 | +/+ | |
|
|
|
|
| |
VESA, 800 x 600 | 37.879 | 60.317 | 40.000 | +/+ | |
|
|
|
|
| |
VESA, 800 x 600 | 48.077 | 72.188 | 50.000 | +/+ | |
|
|
|
|
| |
VESA, 800 x 600 | 46.875 | 75.000 | 49.500 | +/+ | |
|
|
|
|
| |
VESA, 1024 x 768 | 48.363 | 60.004 | 65.000 | ||
|
|
|
|
| |
VESA, 1024 x 768 | 56.476 | 70.069 | 75.000 | ||
|
|
|
|
| |
VESA, 1024 x 768 | 60.023 | 75.029 | 78.750 | +/+ | |
|
|
|
|
| |
VESA, 1360 x 768 | 47.712 | 60.015 | 85.500 | +/+ | |
|
|
|
|
|
Horizontal Frequency
The time taken to scan one line from the
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product |
