MENU |
|
|
| DESCRIPTION |
|
| |||
MagicAngle | This feature allows you to see optimal screen quality according to your viewing position. | |||
| When viewing the screen at an angle from below, above or the side of the monitor, by setting the | |||
| appropriate mode for each position you can obtain a similar picture quality as viewing the screen | |||
| directly from the front. |
| ||
|
| Set to <Off> when viewing directly in front of the screen. | ||
| • | <Off> - Select when viewing from the front position. | ||
| • | <Lean Back Mode1> | - Select when viewing from a slightly lower position. | |
| • | <Lean Back Mode2> | - Select when viewing from the lower position. | |
| • | <Standing Mode> | ||
| • | <Side Mode> | - Select when viewing from the left or right position. | |
| • <Custom> | |||
|
| Users can set suitable picture quality as needed. | ||
|
| This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> or <Cinema> |
|
| mode. |
|
| This menu is unavailable when <MagicColor> or <Color Effect> is set . |
|
| |
Coarse | Removes vertical noise lines (line pattern) from the screen. | |
| The location of the screen may be changed after the adjustment. In this case, move the screen so | |
| that the screen is displayed at the center of the display panel using the | |
|
| This function is only available in Analog mode. |
|
| |
Fine | Removes horizontal noise lines (line pattern) from the screen. | |
| If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then | |
| use the <Fine> function again. | |
|
| This function is only available in Analog mode. |
|
| |
HDMI Black Level | When watching with a DVD or | |
| ration (black level, | |
| nected external device. | |
| • | <Normal> |
| • | <Low> |
|
| This function is active only when the external device is connected via <HDMI>. The <HDMI |
|
| Black Level> function may not be compatible with all external devices. |
Using the product |
