Appendix
|
|
|
PROBLEM |
| SOLUTION |
Forgot password | • Press the STOP ( | ) button (on front panel) for more than 5 seconds with |
| no disc inside. All settings including the password will revert to the factory | |
| settings. |
|
| Don’t use this unless absolutely necessary. | |
•When the factory default settings are restored, all the user data stored in the BD data will be deleted.
If you experience other problems. | • Go to the contents and find the section of the user manual that contains the |
| explanations regarding the current problem, and follow the procedure once |
| again. |
| • If the problem still cannot be solved, please contact your nearest Samsung |
| authorized service centre. |
The picture is noisy or distorted | • Make sure that the disc is not dirty or scratched. |
| • Clean the disc. |
No HDMI output. | • Check the connection between the TV and the HDMI jack of the product. |
| • Check if your TV supports 576p/480p, 720p, 1080i, 1080p HDMI input |
| resolution. |
Abnormal HDMI output screen. | • If random noise appears on the screen, it means that TV does not support |
| HDCP |
| |
I cannot connect to the | • Check whether the network connection is successful or not by using |
| Network Test menu. (See page 39) |
| • Check whether the USB memory device is connected with product |
| or not. |
| • The memory device must have at least 1GB of free space to accommodate |
| the |
| You can check the available size in BD Data Management. (See page 35) |
| • Please check whether the |
| Allow(All). |
| • If all above fails, contact the contents provider or update the latest |
| firmware. |
When using the | • The memory device must have at least 1GB of free space to accommodate |
occurs. | the |
| You can check the available size in BD Data Management. (See page 35) |
✎NOTE
▪ When the factory default settings are restored, all the user data stored in the BD data will be deleted.
58 English
