Wi-Fi Direct Except for BD-F6 series
The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the product and each other using a peer-to-peer network, without a wireless router.
"" Some Wi-Fi Direct devices may not support the AllShare function if connected via WiFi Direct. If this is the case, it is advisable to change the network connection method between devices.
"" Bluetooth transmissions can interfere with the Wi-Fi Direct signal. Before you use the Wi-Fi Direct function, we strongly recommend that you turn off the Bluetooth function of any active mobile device.
1.Turn on the Wi-Fi Direct device and activate its Wi-Fi Direct function.
2.In the Home screen, select Settings, and then press the E button.
3.Select Network, and then press the E button.
4.Select Wi-Fi Direct, and then press the E button. The Wi-Fi Direct devices that you can connect appear.
5.You have three ways to complete the Wi-Fi connection:
●● Through the Wi-Fi device.
●● Through the product using PBC.
●● Through the product using a PIN. Each is covered below.
Through the Wi-Fi Device
1.On the Wi-Fi device, follow the procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.
2.When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the E button to accept.
3.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.
