Ripping

1.Insert a USB device into the USB jack on the front of the product.

2.With the Playback screen displayed, select the Options button and then press the E button. The Options menu appears.

3.Use the ▲▼ buttons to select Ripping, and then press the E button. The Ripping screen appears.

4.Use the ▲▼ buttons to select a track, and then press the E button. A check appears to the left of the track.

5.Repeat Step 3 to select and check additional tracks.

6.To remove a track from the list, move to the track, and then press the E button again. The check on the track is removed.

7.When done, select the Rip button using the ▲▼ button, and then press the E button. The Rip pop-up appears.

8.Use the ▲▼ buttons to select the device to store the ripping file and then press the E button.

"" Do not disconnect the device while rip is in progress.

9.If you want to cancel ripping the track, press the E button and then select Yes. Select No to continue ripping.

10.When ripping is complete, the "Successfully ripped." message appears. Press the E button.

11.Press the RETURN or select the Cancel button and then press the E button to go back to the Playback screen.

"" This function is not available with DTS Audio CD. "" This function may not be supported by some discs.

"" This function will be encoded to the .mp3 format at 192kbps.

"" On the Ripping screen, you can also choose Select All and Deselect All.

"" Use Select All to select all tracks and press the E button. This cancels your individual track selections.

"" Use Deselect All to deselect all selected tracks at once.