Connecting to a Network Router

You can connect your product to your network router using one of the methods illustrated below.

To use the AllShare network functionality, you must connect your PC to your network as shown in the illustrations.

The connection can be wired or wireless.

Wired Network

Broadband modem(with integrated router)

Wireless Network

Wireless RouterBroadbandservice

NOTE

\\ If your wireless router supports DHCP, this product can use a DHCP or static IP address to connect to

Connections 03

Or

Broadband service

the wireless network.

\\ Set your wireless router to Infrastructure mode. Ad- hoc mode is not supported.

Router

Broadband

service

Broadband

modem

NOTE

\\ Your router or your Internet Service Provider's policies may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

\\ DSL users, please use a router to make a network connection.

\\ The product supports only the following wireless security key protocols:

-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)

\\ Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.

\\ If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new Wi-Fi certification specifications.

\\ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).

13 English