![](/images/new-backgrounds/1334695/33469513x1.webp)
Installing the Oven (Continued)
5
Connecting the oven to the power supply | Live | Earth |
| Neutral |
|
Connecting to the mains power supply
EN
Electrical connections must be made as per the connection plate fixed to the back of the ap- pliance by an electrical fitter who must ensure that the appliance has been connected up in accordance with fitting instructions and local regulations.
Where the appliance is not connected to the mains electricity supply by a plug, an omni polar cutout device (with a contacts gap of at least 3 mm) must be fitted on the supply side of the connection to meet safety requirements.
When power is connected, the electronics of the oven are initialised; this neutral- izes the lighting for a few seconds. The electric cable (H05
Open the back cover of the oven at the bottom (using a
The earth wire must be connected to the () terminal of the oven.
If the oven is connected to the power supply by a plug, this must remain accessible once the oven has been fitted.
We cannot accept any liability in the event of an accident resulting from
6 |
7 |
min.5 |
5